PT. Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak dalam bidang industrial testing khususnya untuk pengujian material pada industri / manufacture seperti pada industri bidang (plastic, rubber, tape dan polymer), industri bidang (tinta, pewarnaan, chemical),industri bidang (kertas/paper, pulp) dan industri bidang (garment,textile,yarn dll) dengan inovasi PT. Mora Anugerah Berkat ingin menjadi one stop solution atas kebutuhan industrial testing material yang di butuhkan bagi industri / manufactur yang ada di indonesia.
Tape Retentivity Tester
No.145-D Retentivity Tester adalah alat uji laboratorium yang digunakan untuk mengukur daya tahan rekat (retentivity/holding power) dari pita perekat (adhesive tape) dan lembaran perekat. Alat ini diproduksi oleh Yasuda Seiki Seisakusho dan mengacu pada standar JIS Z0237
Fungsi Alat ini mengevaluasi kemampuan perekat menahan beban dalam posisi vertikal. Sampel perekat ditempelkan pada pelat uji, kemudian diberi beban tertentu. Pengujian mengukur: Waktu hingga sampel terlepas dari pelat. Jarak pergeseran (slippage) sebelum terlepas.
Tape Retentivity Tester
No.145-D Tape Retentivity Tester
Standard Method : JIS-Z0237
This tester is to evaluate the retentivity of adhesive tape and sheet.
By attaching one end of the test specimen to the testing plate for 25 mm squares and applying load to the other end of the test specimen which is vertically hung down, the tester will measure the distance it got out of alignment or the time it required to fall off from the testing plate.
Berikut adalah link / tautan produk catalog yang kami miliki seperti dibawah ini :
Click Here : Yasuda Seiki No.145-D Retentivity Tester Brochure
Click Here : Yasuda Seiki : Plastic, Rubber, Tape & Polymer Catalog
Click Here : Yasuda Seiki : Electric Wire and Cable Catalog
Click Here : Yasuda Seiki : Leather, Vinyl Leather Cloth Catalog
Click Here : Cell Instrument : Plastic, Rubber, Tape & Polymer Catalog
Click Here : Testex Instrument Fabric,Garment & Textile Catalog
Click Here : PT. Mora Anugerah Berkat sudah terdaftar di E-Katalog LKPP
Tape Retentivity Tester
| No.145-D RETENTIVITY TESTER | |
| Specification : | |
| Hangings | 3, 6, 10 or 20 Hangings (4 kinds) |
| Specimen | W25 mm or 12 ± 0.5 mm, L150 mm |
| Test Plate | W50 mm, L125 mm, T1.1 mm or More, Material: SUS304 Made |
| Weight Load | Initial 200 gf to Max. 1 kgf (Standard 1,000 g ± 5 g) |
| Chuck | Upper: Hook type ; Lower: Flat type (W30 mm) |
| Upper and Lower Chuck Distance | 200 mm |
| Chuck Stroke | Max. 45 mm, Electric Concurrent Elevating Device (Up and Down Automatic Stop) |
| Temperature Range | Max. 150 °C |
| Timer | Preheating Time Setting, Drop Time Measuring, Test Time Setting |
| Option | Displacement Measurement Spec, Low Temperature Oven, Constant Temperature & Humidity Oven, Oven Light, 90° Peeling Spec |
| Power Source | Differ by Specifications. |
| Dimensions / Weight (Approx.) | Differ by Specifications. |
Prinsip Pengujian Sampel pita perekat dipasang pada pelat stainless steel. Sampel ditekan menggunakan roller sesuai prosedur standar. Pelat dipasang secara vertikal. Beban standar digantung pada ujung sampel. Sistem mencatat waktu jatuh atau jarak geser sampel.
Aplikasi Digunakan dalam industri : Tape dan label perekat Kemasan (packaging) Plastik dan polimer Otomotif Elektronik Material perekat industri lainnya
Berikut ini adalah daftar alat uji (testing equipment) untuk berbagai pengujian material testing YASUDA SEIKI sebagai berikut :
| YASUDA SEIKI | ||
| Material : Plastic, Rubber, Tape Film and Polymer | ||
| Page | Nama Alat Testing | Code No |
| 1 | TABER TYPE ABRASION TESTER | 101 |
| GEER TYPE AGING OVEN | 102 | |
| 2 | WILLIAM TYPE PLASTOMETER | 105 |
| AUTOMATIC WILLIAM TYPE PLASTOMETER | 105 AUTO | |
| SCHOPPER TYPE SAMPLE CUTTER | 115 | |
| 3 | OLSEN TYPE STIFFNESS TESTER FOR HEAVY LOAD | 118 |
| DIGITAL OLSEN TYPE STIFFNESS TESTER FOR HEAVY LOAD | 118 D | |
| DE MATTIA FLEX-CRACKING AND CRACK GROWTH TESTER | 119 | |
| DE MATTIA FLEX-CRACKING AND CRACK GROWTH TESTER WITH LOW TEMP. OVEN | 119 L | |
| 4 | DE MATTIA FLEX-CRACKING AND CRACK GROWTH TESTER WITH LOW TEMP. OVEN （WITH A PICTURE BREAK DETECTION FUNCTION） | 119- LVR |
| MELT FLOW INDEX TESTER | 120-FWP | |
| 5 | FULLY AUTOMATIC MELT FLOW INDEX TESTER | 120 LABOT-MI |
| AUTOMATIC MELT FLOW INDEX TESTER | 120 SAS-2000 | |
| 6 | BRITTLENESS TEMPERATURE TESTER | 121 |
| R BRITTLENESS TEMPERATURE TESTER（WITH REFRIGERATING MACHINE） | 121 | |
| RA BRITTLENESS TEMPERATURE TESTER (ROTARY HOLDER TYPE) | 121 | |
| 7 | FULLY AUTOMATIC BRITTLENESS TEMPERATURE TESTER | 121 AUTO |
| TEST TUBE AGING TESTER | 122 | |
| SCHOPPER TYPE THICKNESS GAUGE | 128/129 | |
| 8 | AUTOMATIC CAPILLARY RHEOMETER FOR LIGHT LOAD | 140-SAS-2002 |
| AUTOMATIC CAPILLARY RHEOMETER FOR HEAVY LOAD | 140-SAS-2005 | |
| 9 | CREEP TESTER FOR LIGHT LOAD | 145-A |
| CREEP TESTER FOR HEAVY LOAD | 145-B | |
| MIXED CREEP TESTER（STRESS RELAXATION TESTER） | 145-C | |
| 10 | RETENTIVITY TESTER | 145-D |
| TR TESTER | 145-L | |
| SERVOMOTOR TYPE CREEP TESTER | 145-SVS | |
| 11 | GEHMAN STIFFNESS TESTER | 145-G |
| FULLY AUTOMATIC HEAT DISTORTION TESTER | 148-HDA | |
| HEAT DISTORTION TESTER | 148-HD-PC | |
| 12 | HIGH TEMPERATURE HEAT DISTORTION TESTER | 148-HD-500 |
| STRESS-CRACKING TESTER | 149 | |
| LAMBOURN ABRASION TESTER | 150 | |
| 13 | DIN ABRASION TESTER | 151 |
| DIN ABRASION TESTER WITH OVEN | 151-OV | |
| 14 | GEL TIME TESTER | 153 |
| GEL TIME TESTER（CONTINUOUS RECORD TYPE） | 153 | |
| 15 | MARON MECHANICAL STABILITY TESTER | 156 |
| AUTOMATIC MARON MECHANICAL STABILITY TESTER | 156-AUTO | |
| FLOOR MATERIAL FATIGUE AND ABRASION TESTER BY CASTER | 159 | |
| 16 | SLIP TESTER | 162 |
| SLIP TESTER(HORIZONTAL METHOD) | 162-FS | |
| 5 HANGINGS SLIP TESTER | 162-S5 | |
| 17 | O-Y PULL SLIP TESTER | 162-OY |
| CLASH-BERG TORSION FLEXIBILITY TESTER | 170 | |
| AUTOMATIC CLASH-BERG TORSION FLEXIBILITY TESTER | 170-AUTO | |
| COMPRESSION SET TESTER | 171 | |
| 18 | FILM IMPACT TESTER | 181 |
| FILM IMPACT TESTER WITH LOW TEMP. OVEN | 181-L | |
| FALLING BALL IMPACT TESTER | 183 | |
| 19 | BALL TACK TESTER | 183-BT |
| FALLING DART IMPACT TESTER | 183-S | |
| MCBURNEY INDENTATION TESTER | 184-A | |
| RESIDUAL INDENTATION TESTER | 184-B | |
| 20 | OZONE AGING TESTER | 187 |
| PLASTIC SAMPLE CUTTING MACHINE | 189-PAL | |
| AUTOMATIC SAMPLE FORMING MACHINE | 189-PFA | |
| 21 | NOTCHING MACHINE | 189-PN |
| AUTOMATIC NOTCHING MACHINE | 189-PNA/PNCA | |
| TEST MIXING ROLL | 191-TM/WM | |
| 22 | ELECTRIC HEATING SYSTEM TEST PRESS | 196 |
| LUPKE TYPE REBOUND RESILIENCE TESTER | 200 | |
| 23 | YSS HEAT SEALER | 212 |
| JIS HEAT SEALER | 213 | |
| OXYGEN INDEX FLAMMABILITY TESTER | 214 | |
| 24 | ELECTRIC HEATING SYSTEM MINI TEST PRESS | 219 |
| DART IMPACT TESTER | 220 | |
| PLASTIC FLAMMABILITY TESTER | 252-UL-94 | |
| 25 | UNIVERSAL IMPACT TESTER | 258 |
| DIGITAL IMPACT TESTER | 258-D | |
| IMPACT TESTER WITH LOW TEMP. OVEN | 258-L | |
| 26 | FULLY AUTOMATIC IMPACT TESTER | 258-ZA |
| FOAM RUBBER REPEATED COMPRESSION TESTER | 260 | |
| 27 | ROSS FLEXING TESTER | 270 |
| ROSS FLEXING TESTER WITH LOW TEMP. OVEN | 270-LFR | |
| 28 | HEAT SEAL TESTER | 276 |
| PLASTIC SLIDING ABRASION TESTER | 283 | |
| WILLIAM TYPE ABRASION TESTER | 275 | |
| 59 | DU PONT TYPE FALLING IMPACT TESTER | 517 |
| DU PONT TYPE FALLING IMPACT TESTER WITH LOW TEMP. OVEN | 517-L | |
| 66 | ELECTRIC SYSTEM PENCIL SCRATCH HARDNESS TESTER | 553-M |
| PENCIL SCRATCH HARDNESS TESTER | 553 | |
| 67 | FULLY AUTOMATIC PENCIL SCRATCH HARDNESS TESTER | 553-AUTO |
| PENCIL SCRATCH HARDNESS TESTER (LOADCELL TYPE) | 553-F | |
==============================================================
| YASUDA SEIKI | ||
| Material : Electric Wire Cord Testing Machine | ||
| Page | Nama Alat Testing | Code No |
| 1 | GEER TYPE AGING OVEN | 102 |
| 6 | BRITTLENESS TEMPERATURE TESTER | 121 |
| BRITTLENESS TEMPERATURE TESTER（WITH REFRIGERATING MACHINE） | 121-R | |
| BRITTLENESS TEMPERATURE TESTER（ROTARY HOLDER TYPE） | 121-RA | |
| 7 | AUTO FULLY AUTOMATIC BRITTLENESS TEMPERATURE TESTER | 121 AUTO |
| 29 | CABTYRE CABLE IMPACT TESTER | 124 |
| CABTYRE CABLE FLEXING TESTER | 125 | |
| CABTYRE CABLE ABRASION TESTER | 127 | |
| 30 | SPRING ELONGATION TESTER | 161 |
| ENAMELED WIRE STIFFNESS TESTER | 163 | |
| ENAMELED WIRE SOFTENING POINT TESTER | 173 | |
| 31 | VOLT-ENDURANCE AND DESTRUCTION TESTER | 175 |
| PARALLEL PLATE PLASTOMETER | 185 | |
| AUTOMATIC PARALLEL PLATE PLASTOMETER | 185-AUTO | |
| 32 | VOLT-ENDURANCE AND DESTRUCTION TESTER (TWISTPAIR METHOD) | 204 |
| LOW-VOLTAGE CABLE ABRASION TESTER FOR AUTOMOBILE | 208 | |
| 33 | MAGNET WIRE ABRASION TESTER(RECIPROCATING TYPE | 210 |
| SCRAPE TESTER（ONE DIRECTION TYPE） | 215 | |
| 34 | ELECTRIC WIRE FLAMMABILITY TESTER | 252-UL-1581 |
| ELECTRIC RECIPROCATING ABRASION TESTER (PLUG PIN | 253 | |
| PLUG FLEXING TESTER | 254 | |
| 35 | COMPOUND GRINDER | 255 |
| OUTLET PLUG DURABILITY TESTER | 256 | |
| CABLE BENDING TESTER | 262 | |
| 66 | ELECTRIC SYSTEM PENCIL SCRATCH HARDNESS TESTER | 553-M |
| PENCIL SCRATCH HARDNESS TESTER | 553 | |
| 67 | FULLY AUTOMATIC PENCIL SCRATCH HARDNESS TESTER | 553-AUTO |
| PENCIL SCRATCH HARDNESS TESTER (LOADCELL TYPE) | 553-F | |
==============================================================
| YASUDA SEIKI | ||
| Material : Pulp and Paper Testing Machine | ||
| Page | Nama Alat Testing | Code No |
| 1 | TABER TYPE ABRASION TESTER | 101 |
| 7 | SCHOPPER TYPE THICKNESS GAUGE | 128/129 |
| 16 | SLIP TESTER | 162 |
| 16 | SLIP TESTER(HORIZONTAL METHOD) | 162-FS |
| 16 | 5 HANGINGS SLIP TESTER | 162-S5 |
| 18 | FILM IMPACT TESTER | 181 |
| 18 | FILM IMPACT TESTER WITH LOW TEMP. OVEN | 181-L |
| 39 | HANDLE-O-METER | 226 |
| 39 | MULLEN HIGH-PRESSURE TYPE BURSTING STRENGTH TESTER | 304-YPH |
| 39 | MULLEN LOW-PRESSURE TYPE BURSTING STRENGTH TESTER | 305-YPL |
| 40 | FPC FLEXING TESTER | 306 |
| FPC FLEXING TESTER WITH LOW TEMP. OVEN | 306-L | |
| 41 | MIT TYPE FOLDING ENDURANCE TESTER | 307 |
| MIT TYPE FOLDING ENDURANCE TESTER LOW TEMP. OVEN | 307-L | |
| SCHOPPER TYPE FOLDING ENDURANCE TESTER | 308 | |
| 42 | FENCHEL EXPANSION AND CONTRACTION TESTER | 309 |
| KLEMM CAPILLARY RISE TESTER | 310 | |
| GURLEY TYPE STIFFNESS TESTER | 311 | |
| 43 | TABER TYPE STIFFNESS TESTER | 312 |
| 43 | DIGITAL TABER TYPE STIFFNESS TESTER | 312-D |
| 43 | ELMENDORF TYPE TEARING RESISTANCE TESTER | 315 |
| 43 | DIGITAL ELMENDORF TYPE TEARING RESISTANCE TESTER | 315-D |
| 44 | RING CRUSH TESTER | 316 |
| 44 | WATER VAPOUR PERMEABILITY CUP | 318 |
| 44 | AUTOMATIC BEKK SMOOTHNESS TESTER | 321 |
| 45 | GURLEY TYPE DENSOMETER | 323 |
| AUTOMATIC GURLEY TYPE DENSOMETER | 323-AUTO | |
| CANADIAN STANDARD FREENESS TESTER | 324 | |
| 46 | SCHOPPER-RIEGLER TYPE FREENESS TESTER | 325 |
| PULP SCREENING TESTER | 330 | |
| AUTOMATIC K.B.B. SIZEING TESTER | 338 | |
| 47 | CLARK TYPE STIFFNESS TESTER | 342 |
| TAPE ADHESION ROLLER | 349 | |
| GURLEY TYPE WATER ABSORPTIVENESS TESTER (COBB METHOD) | 352 | |
| 48 | STANDARD SAMPLE CUTTER | 353 |
| DOUBLE BLADE SAMPLE CUTTER FOR RING CRUSH TESTER | 355 | |
| CURL-SIZE TESTER | 360 | |
| 49 | WATER VAPOUR PERMEABILITY CHAMBER | 367 |
| INTERNAL BOND TESTER | 368 | |
| CONTAINER COMPRESSION TESTER | 371-S | |
| 52 | COLOUR FASTNESS RUBBING TESTER | 428 |
==============================================================
| YASUDA SEIKI | ||
| Material : Paint , Pigment , Ink , Color Testing Machine | ||
| Page | Nama Alat Testing | Code No |
| 1 | TABER TYPE ABRASION TESTER | 101 |
| 18 | FALLING BALL IMPACT TESTER | 183 |
| 44 | WATER VAPOUR PERMEABILITY CUP | 318 |
| 49 | WATER VAPOUR PERMEABILITY CHAMBER | 367 |
| 51 | CROCK METER | 416 |
| 52 | COLOUR FASTNESS RUBBING TESTER | 428 |
| 56 | FLOW CUP | 505 |
| SPREAD METER | 506 | |
| AUTOMATIC SPREAD METER | 506-PCM | |
| 57 | WET FILM THICKNESS GAUGE | 507 |
| BAKER TYPE FILM APPLICATOR | 510 | |
| PAINT FILM BENDING TESTER | 514 | |
| 58 | ERICHSEN CUPPING TESTER | 516 |
| ELECTRIC SYSTEM ERICHSEN CUPPING TESTER | 516-M | |
| 59 | DU PONT TYPE FALLING IMPACT TESTER | 517 |
| DU PONT TYPE FALLING IMPACT TESTER WITH LOW TEMP. OVEN | 517-L | |
| MERCURY LAMP FADE METER | 518 | |
| 60 | DRAWING TESTER ON PAINT FILM | 519 |
| ZAHN VISCOSITY CUP | 522 | |
| PRINT INK DRYING TESTER | 524 | |
| 61 | GRIND METER | 527/547 |
| SUTHERLAND TYPE RUB TESTER | 528 | |
| DENSITY CUP | 536 | |
| 62 | GARDNER TYPE FALLING SAND ABRASION TESTER | 541 |
| AUTOMATIC FILM APPLICATOR | 542-AB | |
| AUTOMATIC FILM APPLICATOR (HEATING PLATE TYPE) | 542-AB-H | |
| 63 | AUTOMATIC FILM APPLICATOR (CERAMIC PLATE TYPE) | 542-CR |
| AUTOMATIC HOOVER MULLER | 546 | |
| 64 | SAG TESTER | 548-CKG |
| FILM APPLICATOR (DOCTOR BLADE) | 548-YKG | |
| NO PICK UP TIME TESTER FOR TRAFFIC PAINT | 549 | |
| 65 | CROSS CUT EXFOLIATION TESTER | 551 |
| AUTOMATIC CROSS CUT EXFOLIASION TESTER | 551-AUTO | |
| GARDNER TYPE WASHABILITY TESTER | 552 | |
| 66 | PENCIL SCRATCH HARDNESS TESTER | 553 |
| ELECTRIC SYSTEM PENCIL SCRATCH HARDNESS TESTER | 553-M | |
| HAND PUSH PENCIL SCRATCH HARDNESS TESTER | 553-S | |
| 67 | PENCIL SCRATCH HARDNESS TESTER (LOADCELL TESTER) | 553-F |
| FULLY AUTOMATIC PENCIL SCRATCH HARDNESS TESTER | 553-AUTO | |
| VOLUME DENSITY METER | 558 | |
| 68 | RCI TYPE DRYING TIME RECORDER | 567 |
| BARCOATER | 579 | |
==============================================================
| YASUDA SEIKI | ||
| Material : Yarn , Dyeing , Textile and Garment Testing Machine | ||
| Page | Nama Alat Testing | Code No |
| 1 | TABER TYPE ABRASION TESTER | 101 |
| 7 | SCHOPPER TYPE SAMPLE CUTTER | 128/129 |
| 36 | WATER PROOF TESTER | 169 |
| 39 | HANDLE-O-METER | 226 |
| 42 | KLEMM CAPILLARY RISE ESTER | 310 |
| 42 | GURLEY TYPE STIFNESS TESTER | 311 |
| 45 | GURLEY TYPE DENSOMETER | 323 |
| AUTOMATIC GURLEY TYPE DENSOMETER | 323-AUTO | |
| 47 | CLARK TYPE STIFNESS TESTER | 342 |
| 49 | WATER VAPOUR PERMEABILITY CHAMBER | 367 |
| 50 | WATER VAPOUR PERMEABILITY CUP FOR TEXTILE | 401 |
| SPRAY TESTER | 402 | |
| MULLEN TYPE BURSTING STRENGTH TESTER FOR TEXTILE | 404 | |
| 51 | WATER PENETRATION RESISTENCE TESTER FOR TEXTILE | 409 |
| CROCK METER | 416 | |
| 52 | COLOUR FASTNESS RUBBING TESTER | 428 |
| OLSEN TYPE STIFFNESS TESTER FOR LIGHT LOAD | 429 | |
| SCOTT TYPE CREASE FLEX ABRASION TESTER | 433 | |
| 53 | FLAMMABILITY TESTER FOR TEXTILE | 440 |
| VERTICAL FLAMMABILITY TESTER FOR TEXTILE | 440-B | |
| MVSS FLAMMABILITY TESTER | 440-S | |
| 54 | ELMENDORF TYPE TEARING RESISTANCE TESTER FOR TEXTILE | 445 |
| ICI TYPE PILLING TESTER | 453 | |
| 45°FLAMMABILITY TESTER FOR TEXTILE | 455 | |
| 55 | ICI TYPE MACE SNAG TESTER | 473 |
| CANTILEVER TYPE STIFFNESS TESTER | 476 | |
Jika anda membutuhkan/mencari alat Tape Retentivity Tester . yang banyak di gunakan untuk pengujian material plastik, jangan ragu untuk menghubungi kami,marketing dan sales kami siap memjawab segala kebutuhan anda khususnya untuk alat uji Retentivity Test Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di :
Tape Retentivity Tester
PT. Mora Anugerah Berkat (M.A.B)
Click Here : Yasuda Seiki No.145-D Retentivity Tester Brochure
Click Here : PT. Mora Anugerah Berkat sudah terdaftar di E-Katalog LKPP
Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang - Provinsi Banten
Phone : (+62) 021 7345.7064
Mobile/HP : 0812.8140.0749 / 0812.8770.5470
Chat : Whats App, Line, WeChat, Telegram
Website : www.moraanugerah.id - www.moraanugerah.com
Email : info@moraanugerah.com - info@moraanugerah.id - marketing_div@moraanugerah.com